Fluoroscopy Test

80% or above is required to pass this quiz.  You are able to retake the quiz if needed.

1. Annual effective whole-body dose limit for physicians

2. Annual effective whole-body dose limit for a visitor to the hospital

3. Monthly dose limit to conceptus of pregnant worker

4. Threshold for radiation-induced delayed erythema at ~ 2 wks post procedure

5. Threshold for radiation-induced dermal necrosis

6. At an entrance skin dose rate of 250 mGy/minute, in how many minutes of fluorosopy on-time will the threshold for skin atrophy be reached?

7. Which one of the following actions is most likely to increase the entrance skin dose rate to a patient?

8. Why are entrance skin dose rates to larger patients generally greater than those to smaller patients?

9. The principal threat to health from chronic very lowlevel whole-body exposure to radiation is:

10. For an adult abdomen, the radiation level where the beam enters the patient is approximately how many times greater than that which exits the patient?

11. What does a personal radiation badge do?

12. Regarding radiation exposure to the hands, what action is the best practice philosophy?

13. In what year did the FDA issue an advisory on high radiation exposures to patients from fluoroscopy?

14. What is “high-level” control?

15. In the variable pulsed mode of operation which one of the following is FALSE?

16. Regarding the thyroid of a radiation worker, which one of the following is TRUE?

17. Using a C-arm with a fixed distance between the X-ray tube and the image intensifier, the X-ray source was 50 cm from the patient’s skin. The physician repositioned the patient’s table so that the skin was 60 cm from the source. What happened?

18. If a person moves twice as far away from the irradiated area of the patient, the air kerma rate at the new position will be:

19. A reduction in radiation output per pulse of pulsed fluoroscopy results in what change in the appearance of the image?

20. Collimation does NOT:

21. Identify the appropriate location of the Separator cone.

22. Identify the appropriate location of the Collimator blades.

23. Identify the appropriate location of the Grid.

24. Identify the appropriate location of the Image intensifier.

25. Identify the appropriate location of the X-ray tube.